Manufacturing Flexibility and Agility: A Distinctive Comparison

Authors

  • A. Ali Department of Industrial Engineering and Management Sciences, University of Engineering and Technology, Taxila, Pakistan
  • M. Jahanzaib Department of Industrial Engineering and Management Sciences, University of Engineering and Technology, Taxila, Pakistan
  • H. Aziz Department of Industrial Engineering and Management Sciences, University of Engineering and Technology, Taxila, Pakistan

Abstract

Both flexibility and agility are requisite for the successful operation of organization. From manufacturing perspective, there is still confusion of using, implementing and understanding of both concepts. This paper addresses the issue of both in a coherent manner and examined the comparison from manufacturing point of view. It has been learnt that there is a difference of „engineer to order‟ and „innovate to order‟, responsiveness, business network and level of organizational resources. This has been concluded with similarity and differences and stated that forecasting and adaptability are similar key indicators.

References

F. F. Suarez, M. A. Cusumano and C. H. Fine, „Flexibility and

performance: a literature critique and strategic framework‟.

Working Paper #50-91 International Center for Research on the

Management of Technology, MIT, Cambridge (1991).

D. M. Upton, Calif. Manag. Rev. 72 (1994) 77.

D. M. Upton, Harvard Business Review, 21 (1995) 291

E. S. Bernardes, M. D. Hanna, Int. J. Oper. & Prod. Manag. 29

(2009) 30.

H. L. Correa, Linking Flexibility, Uncertainty and Variability in

Manufacturing Systems, London: Avebury (1994).

S. Mariotti, Flessibilita: lezioni e limiti della lean production.

Economia & Management (1995).

B. Newman, M. Hanna and M. J. Maffei, Int. J. Oper. & Prod.

Manag. 13 (1993) 19.

N. Slack, Int. J. Oper. & Prod. Manag. 25 (1987) 1190.

M. Mandelbaum, „Flexibility in Decision Making: An

Exploration and Unification‟ Ph. D thesis, Dept. of Industrial

Engineering, University of Toronto, Canada (1978).

J. A. Buzacott, “The fundamental principles of flexibility in

manufacturing systemsâ€. Proceedings of the 1st International

Congress on Flexible Manufacturing Systems, Brighton,

England (1982) pp.13-22.

J. G. Miller, De Meyer and J. Nakane, Benchmarking Global

Manufacturing, Homewood (1992) pp. 161-180.

A. Muduli, The IUP J. Manag. Res. 12 (2013) 55.

N. Slack, Int. J. Oper. & Prod. Manag. 3 (1983) 4.

N. Slack and H. Correa, Int. J. Oper. & Prod. Manag. 12

(1992) 82.

D. Gerwin, Harvard Business Review (1982) 107.

A. Mair, Int. J. Oper. & Prod. Manag. 14 (1994) 6.

D.A. Aaker and B. Mascarenhas, J. Busin. Strat. 5 (1984) 74.

T.K. Das and B. Elango, J. Gen. Manag. 20 (1995) 60.

M. Jahanzaib, A. Masood, K. Akhtar and K. Ali, Life Sci.

J. Acta Zhengzhou University Oversea Version, Lansing, USA,

MI, 48909, Marsland Press, (2013).

J. H. Sheridan, Agile Manufacturing: Stepping Beyond Lean

Production Industry Week (1993).

R.N. Nagel and R. Dove, „21st Century Manufacturing

Enterprise Strategy: An Industry-lead View‟ Volume 1,

Bethlehem, PA: Iacocca Institute (1991).

C.W. Richards, Prod. Inven. Manag. J. 37 (1996) 60.

L. Struebing, New Approach to Agile Manufacturing, Quality

Progress 28 (1995) 18.

S.L. Goldman, Nagel and Preiss, J. Gen. Manag. 24 (1995) 71.

R.J. Vokurka and G. Fliedner , Inds. Manag. Data Sys. 98 (1998)

H. Sharifi and Z. Zhang, Int. J. Prod. Econ. 62 (1999) 7.

H. Sharifi and Z. Zhang, Int. J. of Prod. & Oper. Manag. 20

(2000) 496.

R. Ramasesh, S. Kulkarni and M. Jayakumar, Integ. Manu. Sys.

(2001) 534.

L.M. Sanchez and R. Nagi, Int. J. Prod. Res. 39 (2001) 3561.

M. Ashraf, M. Jahanzaib, W. Ahmed and S. Hussain, Technical

Journal UET Taxila 19 (2014) 51.

G.H. Lee, Int. J. of Prod. Res. 36 (1998) 1023.

K. Cheng, D. K. Harrison and P. Y. Pan, J. Mater. Process. Tech.

(1998) 96.

U. Saif, Z. Guan, B. Wang and J. Mirza, Pareto Lexicographic αRobust Approach and Its Application Robust Objective

Assembly Line Balancing Problem, Frontiers of Mechanical

Engineering, Springer, DOI 10.1007/s11465.014.0294-x, (2014).

D .Gupta, Int. J. Prod. Res. 31 (1993) 2947.

S.L. Goldman, R.N. Nagel and K. Preiss, Strategies for

Enriching the Customer 35 (1994) 313.

D. Wadhwa and K.S. Rao, Flexibility and Agility for Enterprise

Synchronization: Knowledge and Innovation Management

Towards Flex Agility, Studies in Informatics and Control 12

(2003) 111.

Downloads

Published

11-09-2014

How to Cite

[1]
A. Ali, M. Jahanzaib, and H. Aziz, “Manufacturing Flexibility and Agility: A Distinctive Comparison”, The Nucleus, vol. 51, no. 3, pp. 379–384, Sep. 2014.

Issue

Section

Articles