DEVELOPMENT OF A PROTOTYPE MICRO WIND ENERGY SYSTEM WITH ADJUSTABLE BLADE PITCH FOR EXPERIMENTATION PURPOSES AT LABORATORY LEVEL

Authors

  • M. M. Ashraf Electrical Engineering Department, University of Engineering and Technology, Taxila, Pakistan
  • T. N. Malik Electrical Engineering Department, University of Engineering and Technology, Taxila, Pakistan
  • M. Iqbal Electrical Engineering Department, University of Engineering and Technology, Taxila, Pakistan

Abstract

In this paper, the design of an efficient, operational and productive model of micro wind energy system has been proposed for experimentation purposes at laboratory level. The proposed model constitutes a proficient Horizontal Axis Wind Turbine (HAWT) model with multi-stage pulley system as a gear box and adjustable blade pitch. The wind turbine is coupled to Axial Flux Permanent Magnet Generator (AFPMG). The power density parameter of fabricated AFPMG has been improved to 35.7%. A wind tunnel is placed in front of wind turbine which behaves as the operational source of wind for proposed model. Multiple case studies: demonstration of different components of wind energy system, effect of variable wind speed, effect of variable blade pitch, effect of variable electrical loading, effect of variable pulley ratio, voltage regulation of AFPMG, runaway speed test of HAWT and peripheral speed test of AFPMG are successfully performed on this model. The results obtained from experiments show that proposed model is well suited for experimentation purposes at laboratory level.

References

M. Ashraf, T. Malik, S. Zafar and U. Raja , The

Nucleus 50, No. 2 (2013) 173.

M.O. Hansen, Aerodynamics of Wind Turbines,

Earthscan London, UK (2008).

O. Anaya-Lara, N. Jenkins, J. Ekanayake, P.

Cartwright and M. Hughes, Wind Energy

Generation Modelling and Control, John Wiley &

Sons, Ltd., West Sussex, United Kingdom (2009).

A. Jarral, M. Ali, M. Sahir and R. Pasha, The

Nucleus 50, No. 1 (2013) 7.

N. Deshmukh and S. Deshmukh, International

Journal of Mechanical Engineering and Robotics

Research (IJMERR) 2, No. 3 (2013)61.

A. Rachman, L.A. Muhtar, S. Levi and N. Salea,

International Journal of Innovation and Applied

Studies 3, No. 2 (2013) 365.

S.H.M. Aydin and T.A. Lipo, University of

Wisconsin-Madison College of Engineering,

Wisconsin Power Electronics Research Center

D Engineering Hall 1415 Engineering Drive

Madison, WI 53706-1691 (2004), 11.

Design and Construction of Axial Flux Permanent

Magnet Generator for Wind Turbine Generated Dc

Voltage at Rated Power 1500 W, 4th International

Conference on Electric Utility Deregulation and

Restructuring and Power Technologies (DRPT)

J.F. Gieras, R.-J. Wang, and M.J. Kamper, Axial

Flux Permanent Magnet Brushless Machines,

Springer (2008).

Design of a Direct-Coupled Radial-Flux Permanent

Magnet Generator for W ind Turbines, IEEE Power

and Energy Society General Meeting (2010).

S. Joshi, A. Patel, P. Patel and V. Patel, Int. J. of

Comp. Commun. and Inf. System ( IJCCIS) 2, No.

(2010) 228.

http://www.windynation.com/articles/wind/tipspeed-ratio-how-calculate-and-apply-tsr-bladeselection. Tip Speed Ratio: How to Calculate and

Apply Tsr to Blade Selection.

S. Lain, B. Quintero and Y. López, Journal of

Scientific & Industrial Research 69 (2010) 142.

S. Evren, M. Ãœnel, M.F. AkÅŸit and I. Tuzla,

Mathematical and Computational Applications 18,

No. 3 (2013) 408.

A Novel Wind Mill Generator, International

Conference on Electrical Machines and Systems

(2009).

S. Huang and G. Xie, Journal of Shanghai

University (English Edition) 1, No. 3 (1997) 232.

R.K. Agarwal, Principles of Electrical Machine

Design, Dewan Sanjeev Kumar Kataria, 6 Guru

Nanak Market, Nai Sarak, Delhi 110006, Delhi

(2000).

Downloads

Published

25-02-2014

How to Cite

[1]
M. M. Ashraf, T. N. Malik, and M. Iqbal, “DEVELOPMENT OF A PROTOTYPE MICRO WIND ENERGY SYSTEM WITH ADJUSTABLE BLADE PITCH FOR EXPERIMENTATION PURPOSES AT LABORATORY LEVEL”, The Nucleus, vol. 51, no. 1, pp. 75–86, Feb. 2014.

Issue

Section

Articles